Haas vs CHI garage doors — which is better?
Neither brand is clearly better; both build premium American-made steel doors. CHI wins on faux wood finishes, dent resistance, and parts availability in Oklahoma. Haas wins on color selection, aluminum full-view designs, and deep polyurethane R-values. For most OKC homes we quote both and let the specific model, lead time, and budget make the call.
Two family trees, one quality bar
Haas Door has been run by the same Ohio family for generations out of Wauseon, Ohio. CHI grew up in Arthur, Illinois and is now owned by steelmaker Nucor. Both sell only through professional dealers, both build in the USA, and both sit a full tier above the doors stocked at retail stores. We are an authorized dealer for both, so we have no horse in this race; we install whichever one fits the job.
| CHI | Haas | |
|---|---|---|
| Made in | Arthur, Illinois | Wauseon, Ohio |
| Ownership | Nucor (steel producer) | Family-owned |
| Signature strength | Accents woodgrain laminates | Color range, aluminum full-view |
| Insulation | Polystyrene and polyurethane lines | Polyurethane lineup with R-values to about 18 |
| OKC availability | Excellent, shorter typical lead times | Good, custom colors add time |
Where each brand actually wins
- Faux wood curb appeal: CHI's Accents Woodtones laminate is the finish we get the most driveway compliments on in neighborhoods like Nichols Hills and Deer Creek. Haas offers woodgrain looks too, but CHI's texture reads more convincingly up close.
- Custom color matching: Haas paints in a very wide standard palette, which helps when an Edmond HOA or a designer wants an exact trim-color match without a field repaint.
- Modern glass doors: for full-view aluminum on a contemporary build, Haas has the stronger catalog.
- Hail economics: spec-for-spec pricing is close, but CHI's insulated sandwich doors tend to cost slightly less in our market, which matters when you are buying dent resistance by the square foot.
Pricing and the practical tiebreaker
For an insulated 16x7 sandwich door installed in the OKC metro, the two brands quote very close to each other spec-for-spec, with woodgrain and full-view models commanding a premium over standard panels in both catalogs. Warranties are comparable at the premium tier: lifetime section coverage for the original owner with long paint terms. A free measure and quote from (405) 247-0336 puts exact numbers on your opening, with financing available.
Our tiebreaker is usually logistics. If a storm-damaged door needs replacing before the next hail cycle, CHI's typical lead time to Oklahoma wins. If the project is a design-driven remodel with time to wait, Haas earns its spot. Browse both on our CHI and Haas pages, then book a free measure with our installation team. Related reading: our honest take on CHI quality.
Compare Haas and CHI Side by Side
Talk to a real OKC technician — 24/7, no after-hours surcharge, free estimates.
Related Questions
Are Mid-America garage doors a good budget option?+
Yes, when the application fits. Built in Ponca City, Oklahoma, Mid-America doors give you a dependable steel pan door at rental-friendly pricing, though attached garages usually justify stepping up to insulation. Read the full answer →
Where are CHI garage doors made?+
CHI builds everything in Arthur, Illinois on the campus it has occupied since 1981. Nucor ownership means domestic steel, and OKC dealers typically see two to four week lead times. Read the full answer →
Are LiftMaster and Chamberlain the same company?+
Yes, both belong to the Chamberlain Group of Oak Brook, Illinois. LiftMaster is the dealer-installed professional line while Chamberlain is the retail line, and they share myQ smart technology. Read the full answer →
Send it to a neighbor, or save it for later.
Follow Affordable Door Co on Facebook for seasonal garage door tips and local project photos. Still stuck? Contact us.
Related answers
More answers in this category are on the way — browse the full Answer Hub.